Help, Error messages, 1 error messages – reports – Panasonic KX-FPG391 User Manual

Page 94: 2 error messages – display, Error messages – reports, Error messages – display, 1 error messages – reports, 2 error messages – display, 1 base unit, Help 92

Advertising
background image

10. Help

92

For Fax Advantage assistance, call 1-800-435-7329.

10 Help

10For Fax Advantage assistance, call 1-800-435-7329.

Error Messages

10.1 Error messages –
Reports

If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
54).

COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)

L

A transmission or reception error occurred.
Try again or check with the other party.

COMMUNICATION ERROR
(Code: 43, 44)

L

A line problem occurred. Connect the
telephone line cord to a different jack and try
again.

L

An overseas transmission error occurred. Try
using the overseas mode (feature #23 on
page 76).

DOCUMENT JAMMED

L

The document is jammed. Remove the
jammed document (page 105).

ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)

L

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

JUNK FAX PROH. REJECT

L

The junk fax prohibitor feature of this unit
rejected fax reception.

MEMORY FULL

L

The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 17)
or clear the jammed paper (page 102).

NO DOCUMENT

L

The document was not fed into the unit
properly. Re-insert the document and try
again.

OTHER FAX NOT RESPONDING

L

The other party’s fax machine is busy or has
run out of recording paper. Try again.

L

The other party’s fax machine rang too many
times. Send the fax manually (page 53).

L

The other party’s machine is not a fax
machine. Check with the other party.

L

The number you dialed is not in service.

PRESSED THE STOP KEY

L {

STOP} was pressed, and fax transmission

or reception was canceled.

OK

L

Fax transmission or reception was
successful.

10.2 Error messages –
Display

If the unit detects a problem, one or more of the
following messages will appear on the display.

10.2.1 Base unit

—————————————————————

ALL MAILBOX FULL

L

There is no room left in memory to record
voice messages, or the number of recorded
messages has reached 64. Erase
unnecessary messages (page 68, 70).

—————————————————————

BUSY

L

The called handset is in use.

L

The handset you tried to copy phone book
items to is in use.

L

The handset you are calling is too far from the
base unit.

L

Privacy mode is turned ON for the call you
tried to join (page 51).

—————————————————————

CALL SERVICE

L

There is something wrong with the unit.
Contact our service personnel.

—————————————————————

CHECK DOCUMENT

L

The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 105) and try
again.

L

Attempted to send a document longer than
600 mm (23

5

/

8

"). Press {STOP} to remove

the document. Divide the document into two
or more sheets, and try again.

—————————————————————

CHECK MEMORY

L

The base unit memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.

FPG391_en.book Page 92 Friday, July 16, 2004 5:38 PM

Advertising