Panasonic KX-FPG391 - Manual (Page 92)

9. Option
90
9 Option Handset Registration
9.1 Canceling the handset
registration
If you no longer need to use the handset or if you
want to use the handset with a different base unit
of the same model, it is necessary to cancel the
handset’s registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit are
near each other and not being used.
L Keep the front cover page open for button
locations.
9.1.1 With the handset
1 Press {MENU}.
2 Scroll to “ Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3 Scroll to “ Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4 Scroll to “ Deregistration” by pressing
{v} or {e}, then press the soft key
({SELECT}).
5 Press {3}{3}{5} (DEL.) to delete the
registration memory.
6 Press the soft key ({OK}).
L A beep will sound and the registration
memory will be erased on both the
handset and the base unit.
L “ [-]” is shown on the top right of the
canceled handset’s display.
9.1.2 With the base unit
1 Press and hold {LOCATOR/INTERCOM}
until “
HS REGISTRATION” is displayed.
2 Press the desired extension number you
want to cancel ({1} to {4}).
3 Press {SET}.
L A beep will sound and the registration
memory will be erased on the base unit
only.
Note:
L After canceling registration, the handset
cannot be used. If you want to use it again,
re-register the handset to the base unit.
9.2 Re-registering the
handset
If you want to re-register the handset to the base
unit or a different base unit of the same model,
you need to register it to that base unit. The
handset will be given a new extension number of
that base unit. Only one handset can be
registered at a time.
Make sure the base unit and the other
handsets are near each other and not being
used. Registration must be completed within
1 minute.
L If you have canceled the handset registration
at the previous base unit (page 90), start from
step 5.
L Keep the front cover page open for button
locations.
1 Handset:
Press {MENU}.
2 Scroll to “ Initial setting” by pressing
{v} or {e}, then press the soft key
({SELECT}).
3 Scroll to “ Registration” by pressing {v}
or {e}, then press the soft key ({SELECT}).
4 Press the soft key ({SELECT}) at “ HS
registration”.
5 Base unit:
Press and hold {LOCATOR/INTERCOM}
until “
HS REGISTRATION” is displayed.
6 Handset:
1. Press the soft key ({OK}).
2. Wait until a long beep sounds and the
display shows the registered number.
The registration will be complete.
L The registered number “ [1]” to
“ [4]” will be shown on the top right of
the display.
Example: Extension number 2
Note:
L To stop registration, press {OFF} on the
handset and press {LOCATOR/INTERCOM}
on the base unit.
[2]
Handset [2]
Registered
FPG391_en.book Page 90 Friday, July 16, 2004 5:38 PM