Planet Technology DVR-460 - Manual (Page 52)

DVR-460 User Guide 52
NO. Function Description
1
IP Address / Port / User Name /
Password
Check if the network connection information of the
DVR within which contains the video data you need is
correct.
2
HDD Number / Channel Specify the hard disk (HDD Number) and channel
number (Channel) within which have the video data
you need.
3
Download by Time Specify the time range within which has the video data
you want in the “Start Time” and “End Time” columns.
4
Download by Event Select an event log from the event list. This list shows
all logs in the specified DVR from the latest to the
earliest.
‧
To quickly find the events you need, check or
uncheck the event type “System” / “Manual” /
“Alarm” / “Motion”, and select the log you want.
‧ To view the earlier or later logs that are not shown in
the current page, click “Prev. Page” or “Next Page”.
‧ To refresh the event list, click “Reload”.
5
File Path Assign the location where the backup files are saved.
6
Simultaneous Playback To view the backup images simultaneously when the
download process is in progress, select the checkbox
“Simultaneous Playback”. You will see the backup
images while the images are being downloaded to the
PC or notebook.
To simply backup ima previewing, deselect ges without
the checkbox “Simultaneous Playback”. You will only
see a message box indicating the total time needed,
the current status and the saving location.
7
Download / Cancel Click “Download” to start or “Cancel” to discard the
video backup.