Planet Technology DVR-460 - Manual (Page 66)

DVR-460 User Guide 66
‧ Routine / Motion
“Motion” tab to select the time range within which the recording will be on when any
movement is detected.
‧
Time Table
Find the day and time you want to enable the recording. Then, click to select the time
interval(s). Each interval represents 30 minutes.
To enable the recording all the time, click “＋”; to clear the record timer setting, click “－”.
Alert
In “Alert”, you can set the DVR to beep for notification when there’s any alert happened.
Check the buzzer option you want, and set how long the beep sound will be lasted.
Click “Routine” tab to select the time range for continuous recording, or
Function Description
Ext Alert Check this option to enable the external alert.
Buzzer Enabled This option must be checked for “Motion Buzzer”, “Alarm Buzzer”
and “Video Loss Buzzer” to take effects.
Motion Buzzer / Alarm
Buzzer / Video Loss
Buzzer / Key Input Buzzer
Check one of these 4 options, and you will hear the beep sound
when any movement is detected / the alarm is triggered / video loss
occurs / any DVR key is pressed.
Notified by Select the notification method when any event occurs: Email or FTP.
Duration Set the alert and buzzers to beep for 5 / 10 / 20 / 40 seconds.