Plasmon 800-102913-00 B - Manual (Page 19)

Plasmon AA Express User Manual Hardware Installation
Document Revision B Page 17
Installing the SATA Drives
The appliance is shipped without the SATA drives installed. The SATA drives, in their own shuttles, are
packaged separately, along with blank shuttles to fill any empty drive slots.
To mount the drives into the unpopulated slots of the appliance, prepare each SATA drive shuttle by
pushing the release lever lock to the right to pop out the release lever. Then fully insert each SATA
drive shuttle into the appliance and push the release lever all the way in to lock the drive shuttle in
place.
Figure 6. SATA Drive Release Lever and Release Lever Lock
Plasmon reccomends mounting the SATA drives in the two right most positions in the bottom front of
the appliance. Mount the blank shuttles in the two slots to the left.
Release Lever
Lock
Release Lever