Premio Computer Premio Apollo/Shadowhawk Computer - Manual (Page 50)

CHAPTER 2 HARDWARE INSTALLATION
2-24
Power Saving LED Connector: JGL1
JGL1 can be connected with two-color LED. There are two types of LED that
you can use: 3-pin LED or 2-pin LED (ACPI request). When the 2-pin LED is
connected to JGL1, the light will turn green, when system is On. During
sleep mode, the 2-pin LED will change color from Green to Orange. For 3-pin
LED, when LED is connected to JGL1, this will light when the system is On
and blinks when it is in suspend/sleep mode.
JGL1
+ 1
3
1 3
Green Color
Orange
Color
1 3
Green Color
Orange
Color
1-2 Single Color 1-2 Dual Color
1-3 Blink
3-pin LED 2-pin LED