Panasonic PV-DF204 - Manual (Page 32)

32
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1 Press SEARCH in Playback or Stop
mode to display INDEX SEARCH
screen, and then press NUMBER
keys to select the recording number.
Go directly to the desired recording.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
3 Play begins at search end. To search
forward or back 1 index, press FF or
REW while screen below is displayed
(10 seconds).
NOTE: ↓ indicates start points of each recording.
Example 2:
To cancel, press PLAY.
6 1 5 7 2 3 4
1 7 5 3 4 6 2
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
To go to rec. 6 from rec. 2, enter 4 and press FF.
INDEX SEARCH
ENTER INDEX NUMBER :1
USING 1-9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
EXIT :SEARCH
INDEX SEARCH
FORWARD SEARCH :FF
REVERSE SEARCH :REW
Tape Operation
Index Search
Note
2 Press FF or REW to start search.
NUMBER
keys
ACTION
SET SELECT
▲▼◄►
DISPLAY
STOP
AUDIO
PLAY
FF / SLOW+
COUNTER
RESET
REW/SLOW-
CM / ZERO SEARCH
Search System is ...
Each time a recording is made, an invisible
index mark is placed on the tape. When
timer recordings are made, program index
and information are also included. These
index marks can be used to access or
scan recordings.
PLAY / REPEAT