Running in the loudspeakers, Piega ap 3, as 3 – Piega AP 3 User Manual
Page 10
10
PIEGA AP 3, AS 3
Tips for optimum results...
Note:
Excessively loud music can damage your health
>Listen to music at an acceptable volume level for the sake of your health...!
Recommendations:
>In the first days and weeks listen only at normal volume
>Avoid very high volume levels during initial phase
>Listen to a wide range of programme material
Limit range:
>The recommended amplifier output is 20-200 Watt. It must be ensured
that the volume must only be turned up far enough for the ear to register
an overload
>If the loudspeaker chassis become damaged after a long period of
overload this can be detected beyond any doubt by PIEGA service
technicians - In these cases, PIEGA is not liable for any warranty claims
As a loudspeaker is basically a mechanical transducer consisting of several different components, the individual elements must be
run in during the initial weeks. This will ensure that the sound quality potential of your loudspeakers is fully utilized. You will definitely
notice the resulting improvement in sound.
Running in the Loudspeakers