Piega AP 3 - Manual (Page 5)

Procedure:
>Work in pairs in order to avoid scratches during unpacking
and mounting
>Before unpacking, remove any jewelry such as watches, rings,
bracelets etc. in order to avoid scratching the aluminum surface
>Open the carton as shown in the fi gure and lift out the loudspeakers
and protective cushions
>Carefully remove the protective cushions and protective wrapping by
carefully pulling it up over the loudspeakers
>Check without fail that the delivery is complete, that the loudspeaker
version supplied corresponds to your order and that the loudspeakers
have not been damaged in transit
>If this is the case, follow the instructions on the remaining pages or
contact the dealer where you purchased the loudspeakers
Special care was taken in the packaging of your new PIEGA quality products in order to ensure that your AP 3, AS 3 loudspeakers
reach your living room safely and undamaged. In order to avoid any damage when unpacking the loudspeaker, follow closely the
instructions below without fail.
PIEGA AP 3, AS 3
Instructions for unpacking...
Unpacking the loudspeakers
5
Attention:
PIEGA loudspeakers have cabinets made from polished aluminum
>When unpacking, handle carefully at all times...!