Pioneer DVH-P4100UB - Manual (Page 50)

! When you connect AV component to the
AV input with an RCA cable, you need set-
ting in the initial setting menu. Refer to Set-
ting the AV input on page 46.
% Use the rear RCA input to connect an
auxiliary device featuring RCA output.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX2.
# You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
% Press SRC/OFF to select AUX (AUX1 or
AUX2) as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting on page 45.
Switching between digital and
analog
When this unit is connected to the DEQ-
P6600, you can switch to the AUX mode to
analog or digital. However, when you use
AUX2 as the source, make sure the AUX
mode is set to analog. AUX digital should not
be used with this unit.
1 Press SRC/OFF to select AUX2 as the
source.
Press
SRC/OFF until AUX2 appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX2
cannot be selected. For more details, refer to
Switching the auxiliary setting on page 45.
2 Press BAND/ESC to switch the modes.
ANALOG (analog)
— DIGITAL (digital)
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit
’s owner’s manual.
Selecting the external unit as the source
% Press SRC/OFF to select EXTERNAL as
the source.
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit
’s owner’s manual.
% Press BAND/ESC.
% Press and hold BAND/ESC.
% Press c or d.
% Press and hold c or d.
% Press a or b.
Using the functions allocated to 1/
S.Rtrv to 6/
keys
% Press any of 1/S.Rtrv to 6/
.
Advanced operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
Operating this unit
En
50
Section
02