Available accessories – Pioneer DVH-P4100UB User Manual

Page 62

Advertising
background image

! The center speaker largely determines the

sound image and getting the balance right
isn

’t easy. We recommend reproducing a 2-

ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.

1

Use MULTI-CONTROL to select PEQ (3-

band parametric equalizer) in the audio
function menu.
Refer to Introduction of DSP adjustments on
page 52.

# Adjusted PEQ settings are memorized in
CUSTOM1 in the audio function menu.

2

Press c or d to select the desired item.

PEQ FRONT (speakers)

—FRONT:LOW

(bands)

—F LOW : 80 (center frequency)—

F LOW : 0 (equalizer level)

—LOW 0 :WID (Q

factor)

3

Press d to select the speakers setting

and then a or b to select the speaker to be
adjusted.
FRONT (front speakers)

—CENTER (center

speaker)

—REAR (rear speakers)

# You cannot select speakers whose size is set
to

OFF. (Refer to Setting the speaker setting on

page 58.)

4

Press d to select the band setting and

then press a or b to select the equalizer
band to be adjusted.
LOW (low)

—MID (mid)—HI (high)

5

Press d to select the center frequency

setting and then press a or b to select the
center frequency of selected band.
40

—50—63—80—100—125—160—200—

250

—315—400—500—630—800—1K—

1.2K

—1.6KHZ—2K—2.5K—3.1K—4K—5K

—6.3K—8K—10K—12K (Hz)

6

Press d to select the equalizer level set-

ting and then press a or b to adjust the
equalizer level.
+6 to

–6 is displayed as the level is increased

or decreased.

7

Press d to select the Q factor setting

and then press a or b to select the desired
Q factor.
WID (wide)

—NAR (narrow)

# You can adjust parameters for each band of
the other speakers in the same way.

8

Press BAND/ESC to return to the ordin-

ary display.

Note

You can select a center frequency for each band.
You can change the center frequency in 1/3-oc-
tave steps, but you cannot select frequencies that
have intervals shorter than 1 octave among the
center frequencies of the three bands.

Available accessories

En

62

Section

03

Advertising