POLAR FS3c - Manual (Page 15)

44
When the desired value is on the display, wait until the
wrist unit goes to the day (in 12h time mode) or the month
(in 24h time mode) setting.
3. The value for the day (in 12h time mode) or the month
(in 24h time mode) is fl ashing.
4. DAY is displayed. The weekday indicator is fl ashing.
The weekdays are printed on the display frame.
When
is on the display, press the front button to select
the weekday.
When is on the display,
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
after two seconds.
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode
after two seconds.
When the desired value is on the display, wait until OK? is
displayed. To approve your choice press the front button.
Weekday Indicator
MON = Monday
TUE = Tuesday
WED = Wednesday
THU = Thursday
FRI = Friday
SAT = Saturday
SUN = Sunday
If you need to move the weekday indicator to the previous
weekday, wait until
is on the display and then press the
front button.
Wait until OK? is displayed, and press the front button to
approve your choice.
The wrist unit returns to the Time of Day display.
Note: In a leap year, the wrist unit will skip the 29th of February.
Correct the date in the date settings.
MON TUE WED THU FRI SAT SUN