POLAR FS3c - Manual (Page 18)

47 ENGLISH
4. When the desired value is on the display, wait until OK?
is displayed. Press the front button to approve your
choice.
5. LOW is displayed for two seconds.
A default setting of 80 for the lower limit is fl ashing.
Alternatively, an age-based limit is displayed if you have
set your user information (FS3c).
When is on the display,
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
after two seconds.
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode
after two seconds.
6. When the desired value is on the display, wait until OK?
is displayed. Press the front button to approve your
choice.
The wrist unit returns to the Time of Day display.