PYLE Audio PRJHD198 - Manual (Page 11)

H.Flip key
adjust image left/right rotate
V.Flip key
adjust image up/down rotate
adjust projector vol
Direction key
menu mode .adjust patameter
Menu key
open or switch
the parameter menu
TV/AV
switch the input signal
Display key
Display the work situation
Channel key
TV mode
adjust TV Channel
Promotion key
use for DVB or SD
DVB key
use for digital TV mode
PIP SWITCH KEY
under HDMI or VGA mode
on/close
PIP function
Precautions
1 you need to dry the remote control with a dry cloth immediately
when it gets wet.
2, when the battery hasn't been used for a long time we advise you to
remove it from the remote .be sure that children can't reach the
removed button cell .swallowing a of harm and is very dangerous
Remote control instruction
Remote panel instruction
• • • • • • • • •
16 9/4 3 switch key
switch the display picture for 16 9 or4 3
Power
for turn the power on. ute
open or close the volume
Number Buttons
selects TV channel directly
Image effect reset key
can set the image brightness,
soft colour or personality
quickly in turn
Digital TV use
If your country have the DVB TV signal,when you use this projector digital tv function
first times,please switch to "DTV/CARD
mode,Then it will appear following menu
If you have used the projector digital tv function ,switch to"DTV/CARD mode it will
display the last time program which you received so you should press the DVB menu
key it can display the above menu
Under the full screen display :
press
display key (on the remote ) to display the recent program information
press CH+- key(on the remote),you can change the TV channel
press menu key (on the remote) to entre the menu to change the language or audio
press SIZE +/- key(on the remote) to zoom the picture size under the zoom mode
you can press key to move the picture.
Under the digital tv menu press OK key (on the remote) to enter the setting menu
As following
Move the cursor to Installation press OK key on the remote
it will display the dialogue "password",the default password"0000",
then you can enter the "search"menu.Picture as following
Digital TV setting: