PYLE Audio PRJHD198 - Manual (Page 14)

NOTE: When you replace the projector from a cold to a warm environment water
vapour might occur. Don't turn the projector on when this occurs but wait
until the vapour has disappeared.
KEYSTONE
If a projected picture has keystone distortion, correct image with Keystone
adjustment. The image becomes trapezoid shape when the screen or project is not
level. Please reposition the projector to improve its angle to the screen. However, the
circumference of the image may not be focussed.
If not able to use the Keystone correction function to correct the trapezoid distortion,
Keystone
Screen
Projector
Projector
Screen
Image adjustment
• turn the lens into the projector then turn it out slowly
at the same time looking at the resolution point carefully
when the image is very clearly (take the middle area of the image),it is the
best situation of the lens
Focus adjustment
The new projector using it first time commonly will
appear image faintness and the the image is trapezoid it is course
that not adjust well of the lens focus and the trapezoid
please follow the step the correction
• •
Menu setting
Menu setting method
1. Using the projector press menu key,
the picture disply on screnn to adjust the
menu(picture one)
2. press
key the menu in turn
circle into image > volume >
function > system > setting >
image adjust interface
3. Elect the adjust interface use key
elect the item that need to adjust(picture two
4. use
key to adjust the elect item paremeter
5. Finished the elect item parameter press the
menu key again exit the page
6. Repeat operate the 2 5step
till finished all the parameter's enactment
press
exit key,exit the menu page
otherwise the menu page will auto exit
after a period time
1. Image menu adjustment
a. Press menu key untile disply the
above picture of the menu
b. Press
key elect the option
that need to adjust
c. Press
key adjust
parallelisn elect parameter.
d. Press the "menu" key again exit
the menu page parameter adjust station.