PYLE Audio PRJHD198 - Manual (Page 13)

If the projector is the new one please read projector install
chapter placed the projector connect the powerwire and the signelwire
the operation as follow:
1.Before use the remoter .
Put in two 7 size battery in it
2. Open the power switch on the backboard
the power light begin to flash
press the power key on the remote control or panel
the indicator light turn light
After 2 second the projector lamp begin work
began appear unclear white light on the screen
after 2 minute,the projector begin work
5. For the new projector. When the frist time to use maybe will appear image
unclear or trapezoid distortion please read image adjustment chapter
6. After the image is clear then you can watch program during watching
you also can setup the system parameter please read menu setting chapter
1.During use the projector press power key can let the projector
switch to stay situation
2.After inter into stay situation the projector under auto protect auto release hot
the indicator light is flase situation but here the projector is under auto protect
situation not accept any order if need to startup again must wait for finished
the release hot .
Open operation
Close operation
Menu setting
ENGLISH
• • •
• • • • •
• • • • •
• • • • •
• • • • •
• •
• • • • •
• • • • •
• • •
2. SOUND INTERFACE
3. ADVANCE INTERFACE
4. SYSTEM INTERFACE
This menu for adjusting the sound. You can choose different
sound mode which you prefer
• • • • • • • • • • • • • • • • • •
• • • •
• • • • • •
• • • • • • •
• • • • •
: • • • : • • • : • • • • • • • •
• • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • •
the audio output have three types:normal ,line,speaker;
when you choose the normal mode, the projector internal speaker and
audio output function both work
when you choose the line mode,the projector internal speaker donot work,
only audio output funciton work.
When you choose the speak mode, only the projector internal speaker work,
the audio output function donot work ( no sound output)
• • • • • • • • • • • • • • • •
•
•
• • • • • •
• • •
• • • • • •
• • • • • • •
: • • • : • • • : • • • • • • • •
When you watch the TTX ,you can choose the language and time
by this menu.
OSD language: our projector support English,Chinese
French,German,spanish;
Scale : 4:3/16:9 /letter box , there are three choice.
Only under AV mode, you can switch the 4:3/16:9 /letter box
But under HDMI/VGA/component mode,you only can see 4:3 .
It cannot display 16:9 sale screen.
Hzoom and Vzoom: it only work if you choose the scale:letterbox