Pandigital PI1051DWCB - Manual (Page 13)

13
2. Press MENU .
3. Select Repeat to toggle ON/OFF.
Repeat ON (default) = continuously play all video files on the selected media source until you stop them.
Repeat OFF = play the video files only once.
Import Video Files into Internal Memory
You can import your video files from external media sources (i.e., memory card, USB flash drive) into the DPF’s internal memory. The number of videos you
can import depends on file size and available memory.
TIP: After starting an import, you can press EXIT to cancel the import operation.
Import Videos
1. On the HOME screen, select the VIDEO - Manage button. All present video files will be listed.
2. To import all video files, press MENU and then select Import All .
To import individual video files, use to scroll through the file names, press ‘ + ’ to select the files you want to import (‘ - ‘ will deselect), press
MENU , and then select Import Selected .
Delete Videos from the Internal Memory
You can delete video files only from the DPF’s internal memory. It is recommended that you make backup copies of the video files before deleting them.
Note: Internal Memory must be your selected media source.
1. On the HOME screen, select the VIDEO - Manage button. The video files will be listed.
2. To delete all files, press MENU and then select Delete All .
To delete individual files, use to scroll through the file names, press ‘ + ’ to select the files you want to delete (‘ - ‘ will deselect), press MENU ,
and then select Delete Selected .
3. A confirmation message appears. Select Yes to delete the video files, or No to keep the video files in the internal memory.
TIP: If you select Yes by mistake, press EXIT to cancel the delete operation. Video files already deleted will not be automatically restored.
C A L E N D A R / C L O C K
Your DPF can be used as a personal desk calendar with a real-time clock and alarm, and also displays a continuous slideshow of photos on the selected media
source.
To display the CALENDAR/CLOCK screen, select Clock from the HOME screen. The slideshow will be displaying photos found on the currently selected media
source.
Select Media Source for Calendar Slideshow
You can easily change the media source if you want the calendar/clock slideshow to display photos from a different media source (i.e., memory card,
slideshow folder).
On the CALENDAR/CLOCK screen, press MENU , and then select the Media Source button in the upper right corner.
Select the desired media source from the Select Media screen.
Set Schedule
You can schedule the DPF to automatically go into a “stand-by” mode and resume operation according to your weekly schedule. For example, if you have
your DPF on your desk at work, you may want to display the calendar/clock or play a slideshow from 8:30am to 5:30pm every weekday, and then set the
DPF to remain in stand-by mode throughout the weekend. The following Monday morning, the DPF would resume operation at 8:30am.
1. On the CALENDAR/CLOCK screen, press MENU .
2. Select Set Schedule .
3. Use to move between the fields and to change the field values in Weekdays On/Off .
4. To set the Weekends On/Off , select the Enable Weekends Schedule button, and then use to access the settings.
5. Use to move between the fields and to change the field values in Weekends On/Off .
6. When correct times are set, select Done to return to the previous screen.
Disable Schedule
After the schedule has been set (per above instructions), you can disable the schedule whenever desired.
1. On the CALENDAR/CLOCK screen, press MENU .
2. Select Set Schedule , and then select the Enable Weekdays Schedule or Enable Weekends Schedule button. The time fields will display OFF .
3. Select Done .
Run the Schedule
After the schedule times have been set (per above instructions), you will use the Run Schedule function whenever you want the schedule to take effect.
There are two methods for running the schedule, either from a slideshow or from the CALENDAR/CLOCK screen.