Pandigital PI1051DWCB - Manual (Page 14)

14
CAUTION: After you select the Run Schedule function, any user intervention will cancel the activation (i.e., pressing remote or control button,
powering off) and the schedule will not take effect until you select this function again to re-activate.
Run Schedule from Slideshow
1. Start a slideshow and press ENTER to select the Run Schedule button when it appears in the lower left corner of the screen (approx 10 sec).
2. To run the schedule when the Run Schedule button is no longer displayed, restart your slideshow and then press ENTER to select the Run
Schedule button when it appears.
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the slideshow will again begin to play.
Run Schedule from CALENDAR/CLOCK Screen
1. On the CALENDAR/CLOCK screen, press MENU .
2. Select Run Schedule .
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the Calendar/Clock screen will again be displayed.
A small timer clock will appear indicating the schedule is active, and then the DPF will operate according to the set schedule.
Set Date and Time
1. On the CALENDAR/CLOCK screen, press MENU .
2. Select Set Date/Time , and then select the options and use to change the field values.
3. Select Done .
Set Alarm
You can use your DPF as an alarm clock when desired. You can set the frequency of the alarm, and set the alert to sound the built-in tone or play your
music file.
1. On the CALENDAR/CLOCK screen, press MENU .
2. Select Set Alarm , and then select the options and use to change the field values.
Alarm = set the time you want the alarm to alert.
Frequency = set how often you want the alarm to alert (Once, Daily, Off)
Alert = set the alert to Music or default Tone (if music, the music file must reside on the currently selected media when alarm is activated)
3. Select Done .
When the alarm is set, a small alarm clock or music note will be displayed indicating the alarm alert has been set to either the default tone or music.
Note: At least one MP3 music file must be present on the selected media source for the alert to play music. If you set the alert to play music and there is no
MP3 music file present, the default tone will sound instead.
Turn Alarm Off
When the alarm sounds, press any button on the remote control to stop it and return to the CLOCK/CALENDAR screen.
To cancel the alarm before its scheduled time, follow the previous instructions for setting the alarm and set the frequency to OFF .
R E C I P E S
The DPF’s Recipes feature allows you to view recipes from popular authors such as bon appétit and Good Housekeeping (sold separately on our website
http://www.pandigital.net ).
Sample bon appétit seasonal recipes are included with this DPF so you can experience how the recipe feature works when you purchase and install the complete
seasonal cookbooks.
Note: The Recipes feature is accessible only when the Internal Memory is the selected media source (page 7.)
You will use these instructions for the pre-loaded sample recipes as well as the complete cookbook collections.
View Recipes in Cookbook
1. On the HOME screen, select RECIPES .
2. Select Sample Recipes (or select a Cookbook if you have added seasonal cookbooks). The Cookbook Thumbnails screen will be displayed.
3. Use to scroll through the recipes. (When highlighted, the recipe name will be displayed at the top of the group.)
4. Press ENTER to view a recipe in full screen.
TIP: With an individual recipe displayed, a) press ZOOM to enlarge recipe, b) use to view previous or next recipe, or c) press SLIDESHOW to
view recipes in slideshow, press EXIT to pause, and ENTER to resume
Assign Recipes to ‘My Favorite Recipes’
You can assign recipes from a main Cookbook into six food group categories for quick and easy retrieval: Hors d’oeuvres, Soups, Salads, Entrées,
Desserts and Others . (The food group category names are not changeable).
1. On the HOME screen, select RECIPES .