Paradyne COMSPHERE 6700 SERIES - Manual (Page 36)

Custom Network Interface Settings
5-5 Issue 2 December 1996
Selecting the IP Address of a
Workstation
Use IP Address... to select the Internet Protocol (home)
address of a workstation.
.
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose IP Address... from the Setup menu. The
Internet Address dialog box appears, as shown in
Figure 5-3.
Figure 5-3. Internet Address Dialog Box
4. Enter the IP address. Click on the radial button to reset
the fields to zero.
5. Choose OK.