Panasonic DMR-XS350 - Manual (Page 32)

32
RQT9439
Advanced recording
Chasing playback
Playback from the beginning of the title in the HDD, while the title is
being recorded to the HDD.
Simultaneous rec and play
Playback the previously recorded title while recording onto the HDD
or timer recording onto the disc.
1
Press [DRIVE SELECT] to select the
HDD or DVD drive.
2
Press [DIRECT NAVIGATOR] during
recording.
“ [” is displayed on the recording programme.
3
Press [ 3, 4] to select a title and
press [OK].
To stop play
Press [
∫].
To exit the DIRECT NAVIGATOR screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1 Press [DIRECT NAVIGATOR] to exit the screen.
2 Press [
∫].
[Note]
≥“Chasing playback” and “Simultaneous rec and play” can only be
used with programmes of the same encoding system (PAL/NTSC).
≥Depending on the state of the unit, playback may not be possible.
( > 100)
§ This function can only be used when two satellite cables are
connected to the unit (
> 17) and “Two cables ( Same signal )”
has been selected in Auto Setup ( > 18, 83).
Playing while you are recording
Time Remaining 45:54 (DR) HDD
Page 001/001
Delete Title Edit Title
(Grouped Titles)
OPTION
20.03(Thu)
04.10(Sat)
04.10(Sat)
29.10(Wed)
29.10(Wed) Start Time 22:46 Rec time0:01(DR)
PLAY
RETURN
Select
Social/Economi Sports Video (AVCHD) Movie Not Viewed All
DIRECT NAVIGATOR
Berge und Flüsse
Ausgebildet in der Antarktis
Die Rückkehr der Zombies
Soccer Digest ZDF
KiKa
ZDFdokuk
3 sat
ZDF Helicopter Informationen
Operation during Recording
Check the
recording
programme Press [STATUS ].
e.g., while 2 programmes simultaneous
recording
Switch the
input Press [INPUT SELECT].
Switch to
other
channel
§
Press [ W X CH].
≥Other operation (> 20)
≥During the recording of an encrypted
broadcast, you cannot view or record another
encrypted broadcast. (
> 22)
Display the
recording
programme
on the TV
screen It is necessary to display the recording
programme onto the TV screen to perform
operations such as pause.
≥If the input was switched:
Press [INPUT SELECT].
≥If the channel was switched:
Press [ W X CH].
≥If the drive was switched:
Press [DRIVE SELECT].
To stop
recording It is necessary to display the programme you
want to stop on the TV screen. (
> above)
Press [ ∫].
≥From the start to the end of the recording is
called one title.
To pause
recording It is necessary to display the programme you
want to pause on the TV screen. (
> above)
Press [ ;].
≥Press again to restart recording.
You can also press [ ¥ REC] to restart.
(Title is not split into separate titles.)
≥If paused while recording in DR mode, the
paused part may become a still picture for a
moment during playback of that programme.
Perform 2
programmes
simultaneous
recording
§
Record other programme with
steps 1–3 on page 22.
≥One of the 2 programmes needs to be digital
broadcasting recorded with DR mode.
≥Channel switch / input switch while performing
2 programmes simultaneous recording will
switch between the 2 recording programmes.
Recording programme
displayed on the TV screen
3 KiKa REC2
ZDF
1
REC1
D D H
Recording programme not
displayed on the TV screen
“REC1” and “REC2” will light
REC1
REC2
Unit’s display
DMRXS350EG-RQT9439-L_eng.book 32 ページ ２０１０年１月１４日 木曜日 午後４時２０分