Panasonic DMR-XS350 - Manual (Page 87)

87
RQT9439
C
onv
e
ni
e
nt
fun
c
ti
ons
(All factory default settings are indicated with underlined text.)
§1 The default setting is “PCM”.
§2 The default setting is “Bitstream”.
Sound
Dynamic Range Compression
[DVD-V]
Change the dynamic range for late night viewing.
[On] [Off]
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby Digital/Dolby Digital Plus”, “DTS” and “MPEG” is set
to “Bitstream”, there are no downmix effects for the outputted
audio.
≥The audio output will be in “Stereo” in the following cases.
– AVCHD playback
[Stereo] When connected to equipment that does not
support the virtual surround function.
[Surround
encoded] When connected to equipment that supports the
virtual surround function
Bilingual Audio Selection
(Only when recording from DV input)
Select whether to record the main or secondary audio type when:
≥Copying to a DVD-R, DVD-RW (DVD-Video format), +R and
+RW.
≥“Rec for High Speed Copy” is enabled. (> 86)
≥Recording sound in LPCM (> 88, “Audio Mode for XP
Recording”).
[M 1] [M 2]
≥You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s DV
input terminal). Select the audio on the other equipment.
≥When recording from the unit’s DV terminal, select the type of
audio recording from “Audio Mode for DV Input” ( > 88).
Digital Audio Output
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
It will be converted to 48 kHz regardless of the setting in following
cases.
≥The signals have a sampling frequency of over 96 kHz.
≥The disc has copy protection.
[On] Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a sampling
frequency of 96 kHz.)
Dolby Digital/Dolby Digital Plus § 1
DTS § 2
MPEG § 1
Select to output Dolby Digital, Dolby Digital Plus, DTS Digital
Surround, or MPEG as bitstream or PCM.
[Note]
≥Not making the proper settings may result in noise.
≥If the unit is connected with the HDMI AV OUT terminal, the
specifications of the connected equipment take preference over
this unit and audio selected in these items may not be output
(e.g., when a television is connected, the HDMI audio output of
this unit is limited to down-mixed 2ch.)
[Bitstream] Select “Bitstream” when the connected equipment
can decode the respective audio format.
[PCM] Select “PCM” when the connected equipment
cannot decode the respective audio format.
Refer to the operating instructions for connected
devices to verify whether or not they can decode
each of the audio formats.
Set the speaker output on the amplifier when
output with PCM.
DMRXS350EG-RQT9439-L_eng.book 87 ページ ２０１０年１月１４日 木曜日 午後４時２０分