Pioneer DV-C302D - Manual (Page 19)

19
MAKING CONNECTIONS
Video Connections
This player features S-video, composite video and
component video output possibilities. Check the
manual supplied with your TV or monitor to
determine the best possible connection for your
system.
In addition to making physical connections to your TV
or monitor, it is also necessary to assign the TV
screen size. You can use the [Setup Navigator] in the
Setup screen General to set whether you are using a
wide screen or standard size TV or monitor (page 21).
Additionally, you can use the [TV Screen] setting in
the Setup screen Video menu (page 33).
S-VIDEO OUT
• Make S-video connections to a TV or monitor with
S-video input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect one
of the S-VIDEO OUT jacks on the player to S-video
input on the TV or monitor.
• When using this jack, be sure to set VIDEO OUT
SELECT to the left position.
VIDEO OUT
• Make composite video connections to a standard
TV or monitor with a video input jack.
• Use the supplied video cable to connect one of the
VIDEO OUT jacks on the player to the video input
on the TV or monitor.
• Be sure to match the color of the plug with the
color of the jack (yellow).
• When using this jack, be sure to set VIDEO OUT
SELECT to the left position.
COMPONENT VIDEO OUT
• Make component video connections to a projection
monitor, projector or TV with component inputs to
produce a higher quality video image.
• Use component video cables or 3 video cords (not
supplied) to connect the COMPONENT VIDEO OUT
jacks on the player to the component jacks on the
monitor.
• When making component video connections, make
sure to set the VIDEO OUT SELECT switch on the
rear panel of the player to the right to assign
component video output.
Projection monitor,
projector or TV
DV-C302D
Y
P B
P R
COMPONENT
VIDEO IN
VIDEO
OUT
SELECT
Y
P B
P R
COMPONENT
VIDEO OUT
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN jack to the CONTROL OUT jack of another
PIONEER component bearing the
Î mark, you can
control the player as though it were a component in a
system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
CONTROL
OUT
CONTROL
IN
DV-C302D
Pioneer component
with
Î mark.
S-VIDEO IN
S-VIDEO OUT VIDEO
OUT
SELECT
DV-C302D
TV or monitor
VIDEO IN
VIDEO
OUT
SELECT
VIDEO OUT
DV-C302D
TV or monitor