Polycom DOC2230A User Manual
Page 108
MGC-50/MGC-100 Getting Started Guide
6-2
The Entry Queue Properties dialog box opens.
3.
In the Name box, specify a name for the Entry Queue using up to 20
characters.
4.
In the Numeric ID box, enter a unique per MCU number (default length
is four digits), or leave this field empty to let the NCU assign one when
the Entry Queue definition is completed.
5.
In the Entry Queue Service box, select the Entry Queue Service that will
be used to play voice messages that will guide participants through their
connection process. Leave this field blank to use the default Entry Queue
Service if one is defined.
6.
Select the Audio Only check box.
7.
To allow VTX 1000 users to connect to the Entry Queue, select the
VTX 1000 check box.
8.
Select the IP Only check box to define an IP-Only conference. This
enables the Audio Algorithm selection for the target conference.
9.
If you selected the IP Only option, you can select the Entry Queue to be
Encrypted, and you can select the audio algorithm to use by VoIP