Polycom DOC2230A - Manual (Page 37)

Chapter 3 - Initial System Configuration
3-13
10. To add or modify the sub-service, in the Sub Service dialog box define
the following parameters:
11. Click OK.
The Sub Service dialog box closes and you are returned to the PRI
Settings dialog box (step 9) where you click Next to continue.
Table 3-3: Sub Service Dialog Box Options
Field Description
Name Type the name of the sub-service using up to 20
characters. This name identifies the sub-service.
Dial-out Prefix Type the prefix that your PBX needs to dial out in
order to use this service program. Leave this field
blank if a dial-out prefix is not required.
Information
Element For future release.
Net Specific Select the desired service program from the
drop-down list. If no special specification is
required, select the NULL option.
Backup Dial-Out For future release.