Installing the mgc manager, Installing the mgc manager -4 – Polycom DOC2230A User Manual
Page 28
MGC-50/MGC-100 Getting Started Guide
3-4
Installing the MGC Manager
To configure and control the MGC unit and to setup conferences you must
install the MGC Manager software on a customer-provided computer or
server. Up to 30 MGC Manager-enabled PCs can be connected to each
MGC-50 or MGC-100. A single MGC Manager-enabled PC can manage
multiple MGC systems.
To install the MGC Manager software:
1.
Insert the software CD into the CD drive.
2.
On the Start menu, click Run.
The Run dialog box opens.
3.
Type D:\SETUP (where D is the name of the CD drive), and then click
OK.
The installation wizard starts and the License Agreement window opens.
4.
Click Yes to agree to the terms of the agreement or No to exit the
installation.
If you clicked Yes, the Welcome window opens.
5.
Click Next.
Installing the
MGC Manager
Initial IP
Configuration
Connecting
to an MCU
Configuring the
Network Services
Defining an MCU
Starting the MGC
Manager