Port-unit allocation area, Port-unit allocation area -6 – Polycom DOC2230A User Manual
Page 136
MGC-50/MGC-100 Getting Started Guide
8-6
-Quad Mode must run on the Video+8 card. Participants from multiple
Video+8 cards can take part in a single conference.
—
Video Processors - Total number of video processors from all
Video+8 cards installed in the MCU. Each video processor can run a
single Continuous Presence or Transcoding participant.
•
MUX+ - Displayed is the total number of MUX+ ports available
according to the card type, line rate and encryption. A conference can be
run on multiple MUX+ cards. Encrypted participants always require
MUX+ resources and use more resources than a regular participant.
IP Video participants do not require the MUX+ card, as all IP cards have
built-in MUX+ functionality.
Port-Unit Allocation Area
The Port-Unit Allocation Method box determines how all the resources
are allocated. The selection of the mode can be done only when no
conference is running.