Recording mode, Connecting using the s-video output, Other connections 11 – Pioneer S-DV900ST User Manual
Page 74
Other connections
11
74
En
Recording mode
The Recording mode allows you to make
analog recordings from the
LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including
SURROUND
,
ADVANCED
,
AUTO
,
SYSTEM SETUP
)
become inactive. The display will briefly blink
RecMode On
if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1
Press SOUND.
2
Use the
/
(cursor left/right)
buttons to select ‘Rec Mode?’.
3
Press ENTER.
4
Use the
/
(cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
• When Recording Mode is
On
a stereo
downmix of multi-channel DVD-Audio
and SACD discs is output from the
speakers and from the analog audio
jacks. Note that with some DVD-Audio
disc, only the front left/right channels are
output. When set to
Off
, multi-channel
DVD-Audio and SACD discs are played
through all the speakers, but front L/R
audio is output from the analog audio
jack.
• When
R.Mode On
is selected while
playing SACD, the unit will loose speaker
SW output and bass will become
inaudible.
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
•
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See
S-Video Out
on page 65 for
S-VIDEO
OUT
VIDEO
OUT
E1
NE1
UT
TV
IN
VIDEO
L
R
AUDIO
LINE1
IN
LINE2
IN
FM UNBAL
75
AM L
ANTE
ANTENNA
P
R
P
B
Y
COMPONENT
VIDEO OUT
TV
XV–DV900 / XV–DV700
S-VIDEO
INPUT
NS03_ZFL.book 74 ページ ２００３年７月３１日 木曜日 午後７時０分