Panasonic DMC-LZ7 User Manual

Page 21

Advertising
background image

Preparation

21

VQT1C60

LCD Monitor Display/
Switching the LCD
Monitor Display

Screen display in normal picture

mode [

] (Initial settings)

1 Recording mode

2 Flash mode (P36)

• If you press the shutter button half way

when the flash is activated, the flash
icon turns red.

3 AF area (P22)

• The AF area displayed is bigger than usual

when taking pictures in dark places.

4 Focus (P22)

5 Picture size (P59)

6 Quality (P59)

: Jitter alert (P24)

7 Battery indication

• The indication turns red and blinks if

the remaining battery power is
exhausted. (The status indicator blinks
when the LCD monitor turns off.)

• Replace with new batteries or fully

charged Ni-MH batteries.

• It does not appear when you use the

camera with the AC adaptor
(DMW-AC6G; optional) connected.

8 Number of recordable pictures (P98)

9 Recording state

10 Built-in memory/Card

• The access indication lights red when

pictures are being recorded on the
built-in memory (or the card).

– When using the built-in memory

– When using the card

• Do not do the following when the

access indication lamps lights. The
card or the data on the card may be
damaged and this unit may no
longer operate normally.
– Turn the camera off.
– Remove the batteries or the card

(if used).

– Shake or bump this unit.
– Disconnect the AC adaptor

(DMW-AC6G; optional). (when
using the AC adaptor)

• Do not do the above when pictures are

being read or deleted or the built-in
memory (or the card) is being
formatted (P78).

• The access time for the built-in memory

may be longer than the access time for a
card. (Max. about 7 sec.)

11 Shutter speed (P22)

12 Aperture value (P22)

• If the exposure is not adequate, the

aperture value and the shutter speed
turn red. (They do not turn red when
the flash is activated.)

13 Optical image stabilizer (P61)

• Refer to P87 for information about other

screen displays.

Switching the screen display
You can change the screen display by
pressing [DISPLAY]. This allows you to
display information while taking pictures
such as the picture size or the number of
recordable pictures or take pictures without
displaying any information. Refer to P33 for
details.

11

12

10

1/30

F2.8

4

3

1 2

13

5

6

7

7

8
9

VQT1C60ENG.book 21 ページ 2007年1月11日 木曜日 午後6時49分

Advertising