Panasonic DMC-LZ7 - Manual (Page 35)

Advanced (Recording pictures)
35
VQT1C60
The LCD monitor becomes easier to see
when recording a picture with the camera
held high above your head if the camera is
held as shown in the following illustration.
This is useful when you cannot get close to
the subject because there is a person in the
way.
Press [HIGH ANGLE] A for
1 second.
B : High angle mode icon
• If you press [DISPLAY] for 1 second,
High angle mode is activated. The LCD
monitor
C becomes brighter and easier
to see when the camera is held away
from you. (However it becomes more
difficult to see when looked at straight
on.)
∫ Cancelling High angle mode
Press and hold [HIGH ANGLE] again for
1 second or turn the camera off.
• High Angle mode is also cancelled if
power save mode is activated.
• Pictures are displayed on the LCD monitor
with increased brightness in High angle
mode. Therefore, some subjects may look
different on the LCD monitor. However,
this does not affect the recorded pictures.
• You may not notice the High angle mode
effect if the LCD monitor is difficult to see
because of light from the sun etc. shining
on it. In this case, we recommend using
your hand or another object to block the
light when using the camera.
• High angle mode is not activated in the
following cases:
– In simple mode [
]
– In playback mode
– In print mode [
]
– While the menu screen is displayed
– While the review screen is displayed
Recording a picture with the
camera held high above your head
(High angle mode)
3
HIGH ANGLE
3
ON: PRESS FOR 1 SEC. HIGH ANGLE ON: PRESS FOR 1 SEC.
VQT1C60ENG.book 35 ページ ２００７年１月１１日 木曜日 午後６時４９分