Panasonic AJ-HDP2000P - Manual (Page 10)

10
Controls and their Functions (Continued)
3.7. META DATA Input
zFor META DATA input, an SDI Embedded VANC function is available with the 2K processor, only Y signals in
Ach of Dual Link SDI signals are supported.
zMETA DATA can record up to 2,880 words per segmented frame.
The capacity of 2,880 words is the upper limit even when data exceeds the capacity (the same as single
operation of the HD-D5 VTR in the specifications).
3.8. META DATA Output
zFor META DATA output, an SDI Embedded VANC function is available with the 2K processor, and META DATA
signals are embedded only on Y signals in Ach of Dual Link SDI signals.
zMETA DATA output is embedded up to 2,880 words per segment frame on Y signals, where data is entered
from the head (the same as single operation of the HD-D5 VTR in specification).
zMETA DATA signals are not embedded on the OUTPUT MON (Monitor).
3.9. Other I/Os (HD REF IN, VTR I/F)
zThe reference input of the HD REF IN is only accepted tri-level signals of HD (1920 a 1080/23.98, 24PsF).
Loop-through output is available.
zBe sure to connect the HD SYNC OUT to the HD REF IN of the HD-D5 VTR to supply the tri-level signals of HD
(1920 a 1080/23.98, 24PsF) from 2K Processor.
zBe sure to connect the SERIAL DATA OUT to the HD SDI IN of the HD-D5 VTR.
zBe sure to connect the SERIAL DATA IN to one of the HD SDI OUT1, OUT2 or OUT3 of the HD-D5 VTR.
3.10.Service Only (15 Pin)
Not applicable.
Terminal name Other Input and Output
HD REF IN HD Reference Input BNC a 2 (loop-through a 1),
75 Ω automatic termination
HD (1920 a 1080/23.98, 24PsF) tri-level sync
HD SYNC OUT HD SYNC Output BNC a 1, 75 Ω
HD (1920 a 1080/23.98, 24PsF) tri-level sync
Advanced Reference signal for the HD-D5 VTR
SERIAL DATA OUT VTR HD_SDI Output BNC a 1, 75 Ω
1920 a 1080/23.98, 24PsF
SMPTE 292M compliance
SERIAL DATA IN VTR HD_SDI Input BNC a 1, 75 Ω
1920 a 1080/23.98, 24PsF
SMPTE 292M compliance