Panasonic CW-A121VR - Manual (Page 2)

7.2. How to Operate
Fig. 1
(1) Open the Control Panel Cover.
Fig. 2
(2) Power Supply
Switch off the breaker and set the Main Control Knob to the
OFF position before plugging the power plug into an
electrical outlet.
Fig. 3
(3) Main Control Knob
Set to LOW COOLING or HIGH COOLING and LOW
HEATING or HIGH HEATING as desired. (FAN setting
operates the fan only.)
Caution: If the Main Control Knob is turned off or
changed to a fan setting from a cooling operation
setting, WAIT at least 3 minutes before resetting to
cooling operation.
Fig.4
(4) Thermostat Control Knob.
• If the room temperature is not as desired after a
reasonable period, turn the thermostat control knob
clockwise to make the room cooler or counter clockwise
to make the room warmer.
• When the thermostat control knob is set to 10, moisture
may freeze onto the evaporator fins and prevent
effective cooling. If this happens, turn the main control
knob to FAN and the thermostat control knob counter
clockwise. This will quickly defrost the evaporator fins so
that normal cooling can be resumed.
NOTE: Usually 4-5 is the recommended setting for heating
and 6-7 is the recommended setting for cooling.
Fig. 5
(5) Air Swing Switch.
(Airflow direction adjustment side-to-side)
To obtain a fix airflow direction, set the Air Swing Switch to
“ON” for the vanes to swing from side to side until the
desired flow direction is reached, then switch it to “OFF”.
For continuous side-to-side air circulation, set the Air Swing
Switch to “ON”.
9
CW-A121VR