Panasonic KX-TG6645 - Manual (Page 46)

If you are not sure which setting is
required, contact your service provider/
telephone company.
Turning VM tone detection on/off
The default setting is “On”.
1
MMENUN#332
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “New Voice Mail” is displayed on
the handset and base unit *1 if
message indication service is
available.
– The message indicator on the
handset flashes slowly if the message
alert feature is turned on (“Message
alert”, page 44).
*1 KX-TG6641 series: page 3
Handset
1
MVMN
or
MMENUN#330
R The speakerphone turns on.
R If there are no new messages in
the voice mail, MVMN is not
displayed.
2 Follow the pre-recorded instructions.
3
When finished, press MOFFN.
Base unit *1
*1 KX-TG6641 series: page 3
To listen to voice mail messages, you
have to dial your voice mail access
number manually.
Note for handset and base unit:
R If the handset and base unit
*1 still
indicate there are new messages
even after you have listened to all
new messages, turn it off by pressing
and holding # until the handset or
base unit
*1 beeps.
R If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the unit may not
indicate new messages.
R If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
*1 KX-TG6641 series: page 3
46 For assistance, please visit http://www.panasonic.com/help
Voice Mail Service