Panasonic KX-TG6645 - Manual (Page 48)

Handset
1
During an outside call, press MINTN
to put the call on hold.
2
MbN: Select the desired unit. a
MSELECTN
3
Wait for the paged party to answer.
R If the paged party does not
answer, press M N to return to
the outside call.
4
To complete the transfer:
Press MOFFN
R The outside call is being routed to
the destination unit.
To establish a conference call:
MMENUN a
MbN: “Conference” a MSELECTN
R To leave the conference, press
MOFFN. The other 2 parties can
continue the conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference:
MMENUN a MbN: “Conference”
a MSELECTN
Base unit
n KX-TG6631 series: page 3
1 During an outside call, press
MINTERCOMN.
R All registered handsets beep
for 1 minute.
2 Wait for the paged party to
answer.
R If paged party does not
answer, press MINTERCOMN
to return to the outside call.
3
To complete the transfer:
Press MSP-PHONEN.
R The outside call is being
routed to the handset.
To establish a conference call:
Press MSP-PHONEN 2 times
when the call sharing mode is on
(page 29).
R To leave the conference,
press MSP-PHONEN. The other
2 parties can continue the
conversation.
n KX-TG6641 series: page 3
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset,
enter the handset number.
– To page all handsets, press 0
or wait for a few seconds.
2
Wait for the paged party to
answer.
R If paged party does not
answer, press MINTERCOMN
to return to the outside call.
3
To complete the transfer:
Press MSP-PHONEN.
R The outside call is being
routed to the handset.
To establish a conference call:
Press MCONFN.
R To leave the conference,
press MSP-PHONEN. The other
2 parties can continue the
conversation.
R To put the outside call on hold,
press MHOLDN. To resume the
conference, press MCONFN.
Answering a transferred call
Handset
Press M N to answer the page.
Base unit
Press MSP-PHONEN to answer the page.
48 For assistance, please visit http://www.panasonic.com/help
Intercom/Locator