Panasonic EB-GD93 - Manual (Page 10)

Basic Operation
Switching the Phone On/Off
To switch the phone on or off.
Press and hold
E to switch power on
A greeting animation will be displayed and then the phone will
go into Idle mode.
Press and hold
E to switch power off
Making a Call
Ensure that the phone is switched on, the network operator
logo is displayed and the signal strength meter shows network
coverage is available in the current area.
1 Enter area code and phone number
2 Press
D
International Dialling
Using the automatic international access code (+) you will be able to dial international
numbers without having to know the code for the international exchange.
If the international number is known then it can be entered in the normal fashion
followed by the area code and phone number.
1 Press and hold
0 until + is displayed
2 Press
e to cycle through the abbreviated international
names and press
B to select the required code
3 Enter area code and phone number
4 Press
D
Note: Many countries include an initial “0” in the area code. This should, in most
cases, be left out when dialling international numbers. If you have difficulties making
international calls, contact your Service Provider.
Emergency Calls
To make an emergency call the antenna symbol (
S) must be present.
Enter
112 D or press B when
SOS is displayed in the option area
6
Basic Operation