Panasonic EB-GD93 - Manual (Page 45)

Internet E-mail
The E-mail function will send and receive internet e-mail messages to the mail server
of an Internet Service Provider that supports POP3/SMTP protocols.
E-mail Setup
Before you can send and receive e-mail messages, your SIM must be data enabled
and a contract must be set up with an Internet Service Provider and the relevant
configuration information, supplied by the provider, entered into the phone.
1 From Idle mode press
B 32 to enter the E-mail menu
2 Use
e to select Parameters and press B
3 Use
e to select Server Settings and press B
Up to three Internet Service Providers may be setup
4 Use
f until
Create is displayed in the option area and press
B
A list of configuration parameters will be displayed. The parameter Profile Name will
be highlighted and
Edit will be displayed in the option area
5 Press
B
6 Enter the name of the Internet Service Provider and press
B
7 Use
e to select each of the other parameters in turn and press B in order to
enter the information
8 Press
B and select the next parameter in the list
9 After all parameters which have been supplied by the Internet Service Provider
have been entered, use
f until
Save is displayed in the option area and press
B to store the settings
Record your e-mail settings in the table at the rear of this booklet for easy
reference. For additional information about setting up the Internet E-mail see
http://www.user.mci.co.uk
Create a New Message
1 From Idle mode press
B 32 to enter the E-mail menu
2 Use
e to select Create and press B
3 Enter the relevant details in the To , CC , Subject and Message fields, using
g to
navigate between them.
Note: The To and CC fields must be entered using previously saved mail addresses
in the Phonebook, retrieved in the normal fashion.
4 After entering the necessary information press
B
5 Use
f until
Save is displayed in the option area and press
B
41
Internet E-mail