Pioneer PD-F1039 - Manual (Page 13)

13
VARIOUS
OPERATIONS
BASIC
OPERATIONS
BEFORE
OPERATING
To program and play only the discs
you want to hear (CUSTOM play)
This unit lets you program up to 300 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Also, there are 10 programmable custom files in which you can
program any discs you like.
Operation example : Programming discs 3 and 12 in custom file 5
In the stop mode, press
the MODE button several
times to set the custom
mode.
Select the custom num-
ber with the remote
control unit’s digit but-
tons.
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN PROGRAM
• If some disc number appears, press CLEAR.
• To perform this operation on the main unit, Press direct custom
button 5.
Select the disc number
with the remote control
unit’s digit buttons.
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN PROGRAM
• The disc number can also be selected with DISC (–/+) or the
main unit’s jog dial. In this case, because custom registration
will function after approx. 2 seconds, step 4 is not necessary.
Press DISC SET.
Repeat steps 3 and 4 to
store other discs.
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN PROGRAM
JKL
5
MARK
0
ABC
7 8 3
4 ¢
RANDOM
DISC
DISC SET MARK 0 TRACK SET
PQRS
7
TUV
8
WXYZ
9
TITLE SEARCH
TITLE
INPUT
GHI 4 JKL 5 MNO 6 TITLE DISPLAY
1 ABC 2 DEF 3 TIME/ CHARA
MODE CLEAR PGM REPEAT
– + < CURSOR >
1 ¡
MARK 0
PQRS
7
TUV
8
WXYZ
9
GHI 4 JKL 5 MNO 6
1 ABC 2 DEF 3
CLEAR
MODE
DISC SET
Digit buttons
MODE
DISC (–/+)
CLEAR
DEF
3
9 8 7
0
6 5 4
3 2
DIRECT CUSTOM
1
TIME/CHARA
TIME/CHARA
(
MODE
)
MODE
DISC/
CHARA DIRECT CUSTOM PUSH ENTER
9 8 7
10
6 5 4
3 2 1
STANDBY
ACCESS PLAY OPEN/ CLOSE UNLOAD
STANDBY/ON SINGLE LOADER FILE–TYPE CD MECHANISM Î
CLEAR PROGRAM RANDOM CHARA
TIME/
6
TITLE
SEARCH INPUT DISPLAY
7
PHONES LEVEL
MIN MAX
KEYBORD INPUT
DIRECT CUSTOM
9 8 7
10
6 5 4
3 2 1
DIRECT CUSTOM buttons
MODE
Blink
VARIOUS OPERATIONS
1
2
3
4
5
To start playback
Press DIRECT CUSTOM
buttons.
Playback starts from the lowest
disc No.
Tips:
• Pressing the direct custom
buttons during playback will
carry out custom registration of
that disc.
Checking the numbers of the stored discs.
Remote control unit operation.
Press TIME/CHARA repeatedly (3 times) during stop
mode so that the display changes as shown below.
Press DISC(–/+). Each time you press DISC(–/+), a disc
number stored in the CUSTOM file is displayed. When
all the disc numbers have been displayed, the disc
number changes to a blank. (To perform this operation
on the main unit, turn the jog dial clockwise.)
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM SINGLE CD TEXT PREVIOUS SCAN PROGRAM
Pressing the front panel’s CLEAR button
during the custom mode will cancel the
displayed disc number from the custom
file.
• When the jog dial is used during custom playback, only the
discs stored in the custom file can be selected.
• If you use the digit buttons and DISC during CUSTOM playback
to choose a disc not stored in the CUSTOM file, “NO DISC”
will be displayed for approximately 3 seconds.
• When a disc appointed to the CUSTOM file is not loaded in the
rack, “NO DISC” is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the
next disc.
• The discs stored in the CUSTOM file will not be erased when
you turn off the power.
• When another PD-F1039 is connected to create a 602-disc
changer, 20 custom files can be programmed. Note however
that only discs loaded in the first PD-F1039 can be programmed
in custom files 1 to 10, and only discs loaded in the second PD-
F1039 can be programmed in custom files 11 to 20.
(Memory Back-Up Function)
Memorized data will be stored in memory for approx. 1 month
even if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
3
1
2
4
5
5
Jog dial
( 5 )