Pioneer PD-F1039 - Manual (Page 15)

15
VARIOUS
OPERATIONS
BASIC
OPERATIONS
BEFORE
OPERATING
To playback tracks/discs at random
(RANDOM play)
RANDOM selects tracks at random from the disc(s) in the current
play mode and plays each track once. The selected play mode
stops after its contents are played back. (Refer to chart below.)
Press RANDOM during
either play or stop mode.
The RANDOM indicator lights up
and random play according to the
current play mode starts.
To stop random play,
press
7.
Notes!!
• Random play cannot be activated during the program mode. (If
you press RANDOM during program play or best play, the
program contents will be erased and the unit will start to play
tracks at random from all the discs.)
• If you press REPEAT during random play, the contents of the
random mode are repeated. (RANDOM REPEAT)
• If you press MODE during random play, random play is
switched to the ALL or SINGLE play.
• If all discs contain no more than 25 tracks, random play can play
every track in the discs once.
If any of the discs contain more than 25 tracks, random play
plays the same number of tracks as the total number of tracks
in the discs, but the tracks with track number 26 or more are
not always played once.
• If disc detection has not finished, random play will begin after it
has detection has finished.
• When the all random mode is set while another PD-F1039 is
connected to create a 602-disc changer, the discs on the first
PD-F1039 are first played in random order, then the discs on the
second PD-F1039 are played in random order.
To find out which discs you’ve listened
to recently (PREVIOUS scan)
• This function scans the discs in reverse order, starting from
the last disc you played.
• It can remember up to 20 discs. If the total number of discs
exceeds 20, the oldest disc will be erased to make room for
the new disc.
• The operation is available only from the remote control unit.
• These operations can not be performed on the CD inserted
into the SINGLE LOADER SLOT.
Example: If you played discs 1, 2, 9, 12 and 13 in order.
Press the PREVIOUS
button.
The unit plays a 10 second portion
located one minute into the first
track of each disc, starting from
the last disc you played: 13, 12, 9,
2, 1.
Press
3 ( 6 ) when you
reach the disc you want
to hear.
Previous disc scan is canceled and
normal play resumes.
• To cancel the scanning, press 7.
• Discs played during random, program, HI-LITE scan, Best and
Single Loader playback are not included in the PREVIOUS scan.
• If the first track is less than 1 minute long, the first 10 seconds
of the track the beginning will be played. If the first track is less
than 10 seconds long, the entire track will be played.
(Memory Back-Up Function)
Memorized data will be stored in memory for approx. 1 month
even if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount of memory used.
3
Blink
3
7
PREVIOUS
PREVIOUS
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT
PREVIOUS SCAN PROGRAM
( )
7 8 3
4 ¢
RANDOM
DISC
DISC SET MARK 0 TRACK SET
PQRS
7
TUV
8
WXYZ
9
TITLE SEARCH
TITLE
INPUT
GHI 4 JKL 5 MNO 6 TITLE DISPLAY
1 ABC 2 DEF 3 TIME/ CHARA
HI-LITE BEST PREVIOUS
MODE CLEAR PGM REPEAT
– + < CURSOR >
1 ¡
VARIOUS OPERATIONS
RANDOM
RANDOM
(
RAMDOM
)
MODE
DISC/
CHARA DIRECT CUSTOM PUSH ENTER
9 8 7
10
6 5 4
3 2 1
STANDBY
ACCESS PLAY OPEN/ CLOSE UNLOAD
STANDBY/ON SINGLE LOADER FILE–TYPE CD MECHANISM Î
CLEAR PROGRAM RANDOM CHARA
TIME/
6
TITLE
SEARCH INPUT DISPLAY
7
PHONES LEVEL
MIN MAX
KEYBORD INPUT
RANDOM
Play mode selected
ALL
SINGLE
CUSTOM
Play contents
Plays all tracks in all discs in a random
order.
Plays all the tracks from a single disc at
random.
Plays all tracks in the discs stored in the
CUSTOM file in a random order.
7
6