Pioneer PD-F1039 - Manual (Page 6)

6
LINE OUT CD•DECK SYNCHRO OPTICAL DIGITAL OUT MASTER SLAVE CONTROL LINE IN SLAVE
SLAVE IN MASTER OUT L R L R
CONTROL
IN OUT
R L
C D CONTROL
OUT
DIGITAL
OPTICAL IN
LINE OUT
CD•DECK
SYNCHRO OPTICAL
DIGITAL OUT MASTER SLAVE
CONTROL
LINE IN SLAVE
SLAVE
IN
MASTER
OUT L R L R
CONTROL
IN OUT
CD•DECK
SYNCHRO
L R
L R
CONNECTIONS
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
A Making connections
1 Connect the LINE OUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
• Be sure not to connect this unit to the amplifier’s PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
2 Connect the power cord to a household AC wall outlet.
• Make sure plugs are inserted fully into the wall outlet.
Note!!
If you connect the power cord to a “SWITCHED” AC outlet on an
amplifier, you will not be able to use this unit's memory function.
B Connecting the OPTICAL FIBER CABLE
CD can be played using the digital output.
This unit can be connected to an amplifier equipped with an optical
digital jack.
1. Remove the protective dust cap from this unit’s OPTICAL
DIGITAL OUT jack.
2. Use an optical fiber cable to connect the OPTICAL DIGITAL
OUT jack of this unit to the optical input jack of the amplifier.
• Align the plug of the optical fiber cable with the optical digital
jack and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
C System remote control with a Pioneer stereo
amplifier that has the Î mark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it is
not necessary to connect the CONTROL IN/OUT jacks.
• The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc
Change operations.
• For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
Notes!!
• When a control cable is connected to the player’s CONTROL IN
jack, direct control of the player with the remote control unit is
not possible. Operate the player with the remote control unit by
aiming it at the amplifier.
• Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
• Be sure to turn off the power of the amplifier before connect-
ing the power cord and output cable.
• When only the digital output is connected, the remote sensor
of the amplifier does not function. To operate it, connect the
output cable to the stereo amplifier as well as connecting the
digital output.
D CD•Deck synchro function
If you have a Pioneer cassette deck provided with the CD•Deck
synchro function, connect the CD•DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro
recording can be carried out between the player and deck.
• For details on connections and operation, refer to the operating
instructions supplied with the cassette deck.
• The CD•DECK SYNCHRO cable is not supplied with the CD
player.
• When CD•Deck synchro recording is carried out on several
discs, use the program playback function. (Refer to page 16 for
details of program playback.)
Note!!
In order to enable the CD•DECK SYNCHRO recording function, the
output cable must be connected to the stereo amplifier.
To the CONTROL IN
jack of the Pioneer
component bearing
the
Î mark.
C
Power cord
A-2
Control cable
C
PD-F1039
Stereo amplifier
Optical
fiber
cable A-1
B
Audio cable
Normal conections When connecting another PD-F1039 to
create a 602-disc changer, make the
normal connections, then also make
the connections shown below.
White Red
White Red
LINE OUT CD•DECK SYNCHRO OPTICAL DIGITAL OUT MASTER SLAVE CONTROL LINE IN SLAVE
SLAVE IN MASTER OUT L R L R
CONTROL
IN OUT
LINE OUT CD•DECK SYNCHRO OPTICAL DIGITAL OUT MASTER SLAVE CONTROL LINE IN SLAVE SLAVE IN MASTER OUT L R L R
CONTROL
IN OUT
LINE OUT
CD•DECK SYNCHRO OPTICAL DIGITAL OUT MASTER SLAVE
CONTROL
LINE IN
SLAVE
SLAVE
IN
MASTER
OUT L R L R
CONTROL
IN OUT
LINE OUT
L R
MASTER SLAVE
CONTROL
SLAVE
IN
MASTER
OUT
L
R L L R
R
Cassette deck
Stereo
amplifier
White Red
Control cable
E-2
E-1
MASTER unit
SLAVE unit
CD•DECK
SYNCHRO
cable
D