Printek Mobile Thermal MtP400 - Manual (Page 36)

Printer Configuration
IP Subnet Mask IP Subnet Mask
0.0.0.0
Possible Values: 0.0.0.0*, User specified
This feature specifies the range of addresses, or the size of the network, that the printer’s IP address belongs to.
Note that this feature has no effect if IP Address Method is not set to “Static”.
IP Gateway IP Gateway
0.0.0.0
Possible Values: 0.0.0.0*, User specified
This feature specifies the network node where data destined for a node outside of the LAN should be directed.
Note that this feature has no effect if IP Address Method is not set to “Static”.
Tunnel Port Number Tunnel Port#
08023
Possible Values: 00000 … 08023* … 65384
This feature specifies the TCP/IP port to be used for data that is to be printed..
To advance through the character positions, press the Advance Button. To change the character at the current
position, press the Increment Button.
Note: This feature is available in printers with firmware revision 2.0 and higher.
Options Menu
OPTIONS MENU
The OPTIONS MENU contains features that affect how the printer operates regardless of how features in other
menus have been set.
After entering Setup as described earlier in “Setup Basics”, press the Advance Button until “OPTIONS
MENU
” is displayed on the top line. You may now do one of the following:
press the Enter Button to review and/or change the features available, or
press the Advance Button to advance to the TEST MENU
Pressing the Enter Button will advance through the following features in the order shown below.
30