Pride Mobility Removable Battery Pack SilverStar - Manual (Page 7)

Basic Operation Instructions 7
www.silverstarmobility.com Removable Battery Pack
Battery Pack Installation to Exterior Lift
Follow these steps to install the battery pack to the Exterior Lift:
1. Remove the battery pack from the battery base.
2. Align the mounting holes in the battery pack base bracket with those in
the accessory bracket located under the key switch tube. See figure 1.
3. Secure the battery pack base to the accessory bracket with the supplied
hardware. See figure 1.
4. Insert the battery into the battery pack base, making sure that the connec-
tor on the bottom of the battery aligns and fully connects with the mating
connector inside the battery pack base.
5. Plug the battery cord on the bottom of the battery pack into the mating
connector running from the motor. See figure 1.
Figure 1. Battery Pack Installation to Exterior Lift
KEY SWITCH TUBE
BATTERY PACK BRACKET
INSTALLATION