Input line setting for sub output, Stereo mono, On off – Panasonic WR-XS3P User Manual
Page 18: Dip switch setting
18
■
Input Line Setting for SUB OUTPUT
The SUB OUTPUT jack at the rear panel can output any signal from the STEREO INPUT 1 to 4 jacks or MONO INPUT 1 to 4
connectors. The output setting is determined with the DIP switch setting.
The input signal from the LINE IN jack, MULTI INPUT ST jacks or MULTI INPUT MONO is also assignable to the SUB OUTPUT
jack. The output setting is determined with the assign button setting at the front panel. Refer to p. 19.
●
DIP switch setting
The input line is assigned to the SUB OUTPUT jack by setting Switches MONO 1 to 4 and STEREO 1 to 4.
When all DIP switches are set to ON, the associated input signal is assigned to the SUB OUTPUT jack.
More than one input line is selectable.
The figure shows an example that assigns the MONO INPUT 3 connector, STEREO INPUT 2 jack, and STEREO INPUT 4 jack
to the SUB OUTPUT jack.
ON
OFF
STEREO
MONO
1
2
3
4
1
2
3
4
INPUT SELECT
Any output can be
assigned. Both mono and
stereo inputs are available.
4
2
8
10
0
1
6
4
2
8
10
0
2
6
4
2
8
10
0
3
6
4
2
8
10
0
4
6
MONO
POWER
4
2
8
10
0
1
6
4
2
8
10
0
2
6
4
2
8
10
0
3
6
4
2
8
10
0
4
6
4
4
2
2
8
8
10
0
10
0
6
6
ST
MULTI IN
4
2
8
10
0
6
SUB OUT
STEREO
MONO
STEREO OUT
INPUT
REAK
LINE IN
SUB
4
2
8
10
0
6
MONO OUT
Audio Mixer WR-XS3