Psion Teklogix 8570 - Manual (Page 62)

Chapter 4: Installation
Security Mounting Options
48 Teklogix 8570 Vehicle-Mount Computer User Manual
4.1.2 Security Mounting Options
Security mount kits are designed to prevent the 8570 computer from being removed
from the mount without a special tool.
• 8570 Universal Dual Ball and Socket Mount Security Kit PN 1000398-570
This kit includes a clamp with security hardware and a special Philips bit and
hex socket. The security clamp attaches to an existing 31623 dual ball socket
mount, preventing the mount from being loosened; the security screws prevent
the computer from being removed from the ball and socket mount.
• 8570 Quick Release Mount Security Kit PN 1000304-570
This kit is similar to the standard quick release kit (see “Installing The Quick-
Release Bracket” on page 54) with one exception – the bottom plate includes
security hardware and a Philips bit and hex socket to prevent the mount from
being loosened and the computer removed.
• 8570 Quick Release Mount Security Kit PN 1000509
This kit is designed for use with an existing, installed quick release mount.
This security kit is designed to replace an already installed quick release mount.
It includes a new bottom plate with security screws and a Philips security bit.
4.1.3 Standard Mounting Options
• Universal Dual Ball and Socket Mount PN 31623
The 10.75 inch long ball and socket mount attaches to one of
the two brackets that attaches to the 8570 (31658 or 30876-
400). The other end of the mount can be attached horizon-
tally or vertically to almost any surface. The ball design
allows both ends to be angled to suit the operator's needs.
Two sizes of Clamp base are also available (see below),
which allows the Universal Dual Ball and Socket Mount to
be attached to the cage of a lift truck. One of the existing
round bases is removed and replaced with the Clamp base.