Psion Teklogix 8570 - Manual (Page 72)

Chapter 4: Installation
Installing Security Mount Options
58 Teklogix 8570 Vehicle-Mount Computer User Manual
• Mount the 8570 to the mounting plate (PN 31658) using four security
screws (PN 9000049).
Note: If you are using an external keyboard, sandwich the keyboard bracket
(PN 31596) between the mounting plate (PN 31658) and the dual ball
socket mount. Use security screws (PN 9002011) to attach the three
pieces. Then you can go ahead and mount the 8570 to the mounting plate.
4.2.5.2 Attaching 8570 QR Security Mounts – PN 1000304-570
Figure 4.9 8570 QR Security Mount – PN 1000304-570
• Attach the mounting plate to the 8570 with four security screws
(PN 9000049). Use the special Philips Bit (PN 9000052) and Hex
Socket (PN 9000054) to tighten the screws.
• Attach the security mounting bracket to the mounting plate using four secu-
rity screws (PN 9000053), two on either side of the bracket.
Important: If you are planning to replace an already installed quick release
bracket with a security bracket, you’ll need to use the 8570 Quick
Release Mount Security Kit – PN 1000509.
Mounting Plate PN 31659
Security Mounting Bracket
PN 1000303