Polaroid 20070918 - Manual (Page 15)

- - 14
System Connections
• Do not connect the power cord until all other connections have been made.
• Ensure that you observe and correctly connect colored cables when connecting audio and video
cables.
• Before connecting, open the cover on the right side of the unit’s rear panel.
• If you wall mount the television, ensure that screws used between the wall mount and the back
of the television are 18 mm (0.70”) or less in length.
Connecting an External AV Signal Source (AV1)
Use AV cables to connect an external AV signal source to the AV1 (Composite) input jacks on the
jack panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and then use the
Input button to select AV1 (Composite) mode.