Polaroid 20070918 - Manual (Page 17)

- - 16
System Connections
Connecting External an AV Signal Source（AV3/AV4）
Use AV cables to connect an external AV signal source to the Y/Pb (Cb) /Pr (Cr) (Component) input
jacks on the rear panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and press the Input
button to select AV3 (Component) or AV4 (Component) mode.
Note:
Component signals typically provide better image quality than composite or S-Video signals.