Polaroid 20070918 - Manual (Page 16)

- - 15
System Connections
Connecting an External AV Signal Source (AV2)
Use audio cables to connect an external signal source to the AV2 (Composite 2) audio input jacks
on the jack panel of the unit. Use either composite video or S-Video cables for the video connection
to the input jack on the jack panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and use the Input
button to select AV2 (Composite) mode.
Note:
1. S-Video signals typically provide better image quality than composite video signals.
2. If both composite and S-Video video input signals are connected, the TV will default to the
S-Video signal.