Selecting stations from the preset channel, List, Tuning in strong signals – Pioneer DEH-P80RS User Manual

Page 17: Selecting stations from the preset channel list, Tuner

Advertising
background image

Black plate (17,1)

2

Press MULTI-CONTROL to turn BSM on.

Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers 1

–6 in the order of their signal strength.

When finished, the preset channel list ap-
pears.

# To cancel the storage process, press
MULTI-CONTROL.

3

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station; press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.

Note

Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using buttons

1

–6.

Selecting stations from the
preset channel list

The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.

1

Turn MULTI-CONTROL to switch to the

preset channel list mode.

# You can also perform this operation by press-
ing joystick on the remote control.

2

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station; press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.

# If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.

Notes

! You can also recall stations assigned to preset

tuning numbers by pushing

MULTI-CONTROL

up or down during the channel display.

! You can also recall stations assigned to preset

tuning numbers

1

–6 by pressing one of the

preset tuning buttons

1

–6 on the remote con-

trol.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.

1

Use MULTI-CONTROL to select Local.

Local appears in the display.

2

Press MULTI-CONTROL to turn local

seek tuning on.
Local seek sensitivity (e.g.,

Level 2) appears in

the display.

# To turn local seek tuning off, press
MULTI-CONTROL again.

3

Push MULTI-CONTROL left or right to

set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM:

Level 1

—Level 2—Level 3—Level 4

AM:

Level 1

—Level 2

The

Level 4 setting allows reception of only

the strongest stations, while lower settings let
you receive progressively weaker stations.

<CRD4082-A/N>17

Tuner

En

17

English

Section

04

Advertising