Panasonic AJ8 (J8) - Manual (Page 2)

AJ8 (J8)
ORDERING INFORMATION
PRODUCT TYPES
1. Standard actuator type
(1) Without indication on actuators
Remarks: 1. A letter indicating the actuator color is entered in place of asterisk. (W: White, B: Black, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, and Y: Yellow).
Standard flange color is black. For other colors type, they are custom ordered. For requests of other flange color, please enter the following letter before the “F”
in the part number. (W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green and Y: Yellow)
2. Long guard type is available for .250 Quick-connect terminal and soldering terminal type. When ordering, please add a “T” before the “F” at the end of the part
number.
3. The color of indication on the actuator:
• For white actuator: black
• For others: white
4. They come with a stamp indicating international standards without your request.
5. Note that the position of the
I mark on the flange is used as a reference for left angle and right angle terminals as shown in the diagram below.
Terminal shape Poles Operating types
Part No.
Without indication
.250 Quick-connect terminal
1-pole
ON-OFF
AJ8100 ∗F
2-pole AJ8200 ∗F
Soldering terminal
1-pole AJ8110 ∗F
2-pole AJ8210 ∗F
PC board terminal
1-pole AJ8120 ∗F
2-pole AJ8220 ∗F
PC board right angle terminal
1-pole AJ8130 ∗F
2-pole AJ8230 ∗F
PC board left angle terminal
1-pole AJ8140 ∗F
2-pole AJ8240 ∗F
Actuator indication
0: No indication
1: indication
2: indication
8: AJ8 switch
Nil: Standard actuator
W: Wide actuator
Actuator color
W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green Y: Yellow
Flange color
Nil: Black (standard color)
(Custom ordered color: W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, Y: Yellow)
Remark 1)
Insulation guard
Nil: Short guard type
T: Long guard type (.250 Quick-connect terminal and soldering terminal of standard actuator only)
F: Cadmium-free product
Number of poles and Operation
1: 1-pole, single throw (ON-OFF)
2: 2-pole, single throw (ON-OFF)
AJ 8 F
Terminal shape
0: .250 Quick-connect terminal
1: Soldering terminal
2: PC board terminal
3: PC board right angle terminal (for standard actuator only)
4: PC board left angle terminal (for standard actuator only)
Remarks: 1. Please consult us for details concerning different flange colors.
2. “ I O” is engraved on all flanges.
3. The color of indication on the actuator:
• White actuator: black
• Others: white
Right angle terminal Left angle terminal
I mark I mark
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.