Panasonic AJ8 (J8) - Manual (Page 3)

AJ8 (J8)
(2) With indication on actuators
Remarks: 1. A letter indicating the actuator color is entered in place of asterisk. (W: White, B: Black, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, and Y: Yellow).
Standard flange color is black. For other colors type, they are custom ordered. For requests of other flange color, please enter the following letter before the “F”
in the part number. (W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green and Y: Yellow)
2. Long guard type is available for .250 Quick-connect terminal and soldering terminal type. When ordering, please add a “T” before the “F” at the end of the part
number.
3. The color of indication on the actuator:
• For white actuator: black
• For others: white
4. They come with a stamp indicating international standards without your request.
5. Note that the position of the
I mark on the flange is used as a reference for left angle and right angle terminals as shown in the diagram below.
2.Wide actuator type
(1) Without indication on actuators
(2) With indication on actuators
Remarks: 1. A letter indicating the actuator color is entered in place of asterisk. (W: White, B: Black, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, and Y: Yellow).
Standard flange color is black. For other colors type, they are custom ordered. For requests of other flange color, please enter the following letter before the “F”
in the part number. (W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green and Y: Yellow)
2. The color of indication on the actuator:
• For white actuator: black
• For others: white
3. They come with a stamp indicating international standards without your request.
SPECIFICATIONS
1. Contact rating
Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.
Terminal shape Poles Operating types
Part No.
With I O indication With — O indication
.250 Quick-connect terminal
1-pole
ON-OFF
AJ8101 ∗F AJ8102 ∗F
2-pole AJ8201 ∗F AJ8202 ∗F
Soldering terminal
1-pole AJ8111 ∗F AJ8112 ∗F
2-pole AJ8211 ∗F AJ8212 ∗F
PC board terminal
1-pole AJ8121 ∗F AJ8122 ∗F
2-pole AJ8221 ∗F AJ8222 ∗F
PC board right angle terminal
1-pole AJ8131 ∗F AJ8132 ∗F
2-pole AJ8231 ∗F AJ8232 ∗F
PC board left angle terminal
1-pole AJ8141 ∗F AJ8142 ∗F
2-pole AJ8241 ∗F AJ8242 ∗F
Terminal shape Poles Operating types
Part No.
Without indication
.250 Quick-connect terminal
1-pole
ON-OFF
AJ8W100 ∗F
2-pole AJ8W200 ∗F
Soldering terminal
1-pole AJ8W110 ∗F
2-pole AJ8W210 ∗F
PC board terminal
1-pole AJ8W120 ∗F
2-pole AJ8W220 ∗F
Terminal shape Poles Operating types
Part No.
With I O indication With — O indication
.250 Quick-connect terminal
1-pole
ON-OFF
AJ8W101 ∗F AJ8W102 ∗F
2-pole AJ8W201 ∗F AJ8W202 ∗F
Soldering terminal
1-pole AJ8W111 ∗F AJ8W112 ∗F
2-pole AJ8W211 ∗F AJ8W212 ∗F
PC board terminal
1-pole AJ8W121 ∗F AJ8W122 ∗F
2-pole AJ8W221 ∗F AJ8W222 ∗F
Type Voltage
Resistive load
(cos
φ
] 1.0)
Motor load
(EN61058-1)
(cos φ ] 0.6)
AJ8 switch 250V AC 16A 4A
Right angle terminal Left angle terminal
I mark I mark
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.