Panasonic TQBH9003-6 - Manual (Page 91)

91
Wireless card /Projector LAN card
Fitting
q q Turn off the power to the
projector
Turn off the power referring to How
to turn off the power supply given on
page
31 .
w w Open the slot cover
e e Insert the wireless /LAN card
With the side of LED facing
up, insert the card until it reaches the
depth and is locked.
Note:
• Pay attention to the difference
between up and down sides of the
card. Forcible insertion of the
card in a wrong direction may
cause a fault.
r r Close the slot cover
Removal
q q Turn off the power supply to
the projector
Turn off the power referring to How
to turn off the power supply given on
page
31 .
w w Open the slot cover
e
e Press the ejector button
Press the ejector button and it will
pop out.
r r Further depress the ejector
button, and take out the
card
t t Close the slot cover
Ejector button